(첨부)_한국건설기술연구원_사칭_피해_예방_안내문

한국건설기술연구원 직원 사칭 사기 주의

최근 연구원 직원을 사칭하여 개인 계좌로 대금 이체 요구, 물품 대리 구매요청, 금융상품 가입유도 등의 다양한 사칭 범죄 사례가 확인되고 있습니다. 연구원은 어떠한 경우에도 개인 계좌로의 이체를 요구하지 않습니다. 피해가 발생하지 않도록 각별히 유의해주시기 바랍니다.

주요 사칭 사기 수법

  • 한국건설기술연구원 직원(허위 또는 수집된 실명)의 이름을 사용
  • 허위 공문을 작성하여 물품 납품 유도
  • 한국건설기술연구원 직원을 사칭하면서 계약체결 절차 없이 물품 선납유도
  • 이메일/유선 등을 통한 특정업체를 소개하며 물품 구매 및 계약유도
  • 연구원 직원을 사칭하여 해킹메일, 피싱사이트 접속 및 개인정보 입력 유도

대응방법

  1. 전화번호 및 이메일 도메인 확인

    연구원 명의로 의심스러운 연락을 받으신 경우 연구원 홈페이지 정보를 통해 발신처 사실여부를 반드시 확인 (홈페이지 경로: kict.re.kr > KICT 소개 > 조직 > 직원찾기)

  2. 발신처/공문 진위확인

    의심스러운 경우 계약부서/연구부서에 직접 문의

  3. 선입금 및 선납 금지

    연구원은 대리구매를 통한 선입금 및 선납을 요청하지 않음

  4. 사기의심 즉시 신고

    사기의심 사례가 발생하는 경우 경찰(112)에 신고하시고, 추가 피해를 예방하기 위해 사기 시도 연락처를 전기통신금융사기 통합대응단에 등록 및 신고하여 주시기 바랍니다.

    [링크 이동: 전기통신금융사기 통합대응단 - https://www.counterscam112.go.kr/]

KICT 한국건설기술연구원 (KOREA INSTITUTE OF CIVIL ENGINEERING AND BUILDING TECHNOLOGY)

오늘하루 보지않기 닫기

Research Information

Maintaining Bridge Safer; Digital Sensing-based Monitoring System
  • NameKICT
  • Date2024/11/25 00:00
  • Hit1411
Maintaining Bridge Safer; Digital Sensing-based Monitoring System 
- Establishing a foundation for local technology commercialization in Vietnam -

Korea Institute of Civil Engineering and Building Technology (KICT, President Kim Byung-Suk) developed a smart monitoring system that applies digital sensing technology to maintain and manage small- and medium-sized aging bridges. This study was conducted as an international matching joint research funded by KICT, and established a foundation for technology diffusion to ASEAN countries through joint research with University of Transport and Communications (UTC) in Vietnam.

In general, bridge maintenance monitoring technology is applied to long-span bridges such as cable-stayed bridges and suspension bridges. This monitoring system consumes a lot of resources for design and installation, and the system configuration itself is complex, so there are limits to its application for maintenance of small- and medium-sized bridges.

Currently, the most actively used bridge monitoring system is operated based on analog measurement and sensing. Due to the nature of the signal, the analog method is vulnerable to electrical noise, so there is a high possibility of data quality deterioration, and there are limitations in effectively processing various types of signals collected from sensors. Additionally, because analog sensors require 1:1 wiring between the sensor and the receiver, the configuration complexity and installation cost increase dramatically as the system grows.

1_Digital sensing based smart monitoring software
The digital sensing technique adopted by KICT to overcome the limitations and problems of analog sensors has a low possibility of data quality deterioration due to noise. It also has excellent data transmission speed and processing ability, making up for the shortcomings of analog sensing.

In addition, by using the BUS communication serial connection method, multiple sensor data can be integrated and transmitted through a single wire. This method is widely used in various applications due to its simplicity and economic efficiency. Furthermore, it has the advantage of complementing and replacing analog sensing in terms of simplification of system configuration. 

2_Indoor and field test for the digital monitoring
In the case of Vietnam, which co-participated in the study, various transportation infrastructure, including bridges, are being built along with economic growth, but effective maintenance techniques are more required. Although overseas manpower and technology are being introduced to perform facility maintenance, only a few applications are being made to long-span bridges and large structures due to a limited maintenance budget and lack of technology and professional manpower. Safety monitoring for general maintenance of small- and medium-sized bridges has not been implemented, so it is necessary to introduce efficient monitoring techniques suited to local conditions.

The research team led by Dr. Dong-woo, Seo, at the Department of Structural Engineering Research of KICT, developed a monitoring system that can be efficiently applied to small- and medium-sized aging bridges through digital sensing techniques, and verified the performance of the system by demonstrating it on site with a research team at UTC in Vietnam. The measurement performance and local applicability of the based smart monitoring system were confirmed.

3_Project summary
In particular, the smart monitoring technique developed by KICT can accurately calculate the vertical displacement of the target bridge with simple sensor placement and coordinate input. This is provided to the user in real time through a GUI (graphical user interface), and simple operations are required to operate the system and produce results. 

As a result of local verification in Vietnam, the bridge vertical displacement and actual measured deflection results showed an accuracy of more than 95%. Also, the developed system and monitoring algorithm technology are transferred to ‘ATECH SOLUTION, Inc.’ for the commercialization.

Dr. Seo said, “The biggest advantage of the developed digital smart monitoring technique is user-friendliness,” and added, “Easy to use and economical monitoring technique through a simple system installment method using digital sensors and a GUI-based data analysis system.”

###
Korea Institute of Civil Engineering and Building Technology, a government-funded research institute with 41 years of extensive research experience, is at the forefront of solving national issues that are directly related to the quality of the people’s life. 
The research for this work was carried out under the KICT Research Program (project no. 20240400-001, Development of digital sensing based smart monitoring system for the maintenance of aged bridges in Vietnam) funded by the Ministry of Science and ICT. 

QUICK